Thursday, April 11, 2019

An Overview On How To Make Paper Beads

By Matthew Bennett


There are a lot of fun things people can do when at home, particularly easy craft. This includes making good things out of junk. Below are some steps on how to make paper beads out of junk materials. Tools needed include glue, scissors, pencil or pen, varnish, ruler, string, an assortment of papers, paper plate, and dowel or toothpick

Firstly, tear a paper from the magazine or newspaper. Cut it into strips beginning from top to bottom using a paper cutter or scissors. Triangular shapes are more appropriate. A template can give you guidance on how to cut the strips. The bead width should be the base of the triangle.

Secondly, take a strip and roll it onto itself from the wide end using a toothpick or dowel. This forms a cylindrical shape. When you are through with the alignment, roll the piece back and apply some glue across the breadth using a hairbrush. To ensure the symmetry of the bead is achieved, roll the paper over the glue and make sure at each side the spirals are equal. If you want a freestyle design, you should not trouble over alignment and you can then let the strip be a bit off the center.

The third step involves gluing the aforesaid rolled piece of paper on the apex. Caution should be taken to ensure that it stays firmly rolled. Other considerations that you should put in place are to ascertain the paper is glued down. This ensures that the pressure conveyed is effectively absorbed. If the gluing does not work, you should apply once anew till it functions appropriately.

The next step is to apply varnish to the bead on dry the glue. This makes it water resistant. It is prudent to swivel them around the cocktail stick so as to prevent them from sticking when completely dry. Ensure the glue dries completely and ensure it does not attach to something else. A toothpick stuck into a pincushion or some foam can also be used to shove the excess glue. A longer-lasting and glossier finish can be achieved by adding several coats.

After the beads are dry and the varnish is well set, remove them from the dowel and place them in strings. Sliding the beads off the cocktail stick is a safe way of removing the beads and ensuring the safety of your work. If some items untie, it shows that the paper was not wrapped or glued well. Think of putting them back to the cocktail stick and add more glue. Leave them to dry for some more hours.

The other step is to ensure you wipe out traces of glue before you start making another bead to prevent it from sticking out. After completion of the above steps, you are now in a position to create long strings and use them to make bracelets, necklaces, earrings, and home decors. Decorate your beads by adding glitter and paint on them.

A keen follow on this procedure gives you fine results as the items are delicate at times. They can also be used to make earrings, necklaces, and bracelets. You can also decorate your house with them. This is considered a good way of conserving the environment.




About the Author:



No comments:

Post a Comment